Weak solvent TPV-3612

[ model ] TPV-3612

[ physical properties ] this series of products is polyacrylate emulsion, can be diluted with pure water in any proportion, non-toxic, non-irritating to the skin.

Appearance: milky white viscous emulsion

solid content: 36 ± 1%

PH value: 6-8

viscosity: 1500-2500 mpa. S

stability: 3 months

[ use ] this series of products used in weak solvent ink-jet printing mercerized cloth, weak solvent ink-jet printing seamless wall cloth.

[ characteristics ] can replace the company TPH-A, better performance. The coating is transparent, strong adhesion, good waterproof, non-stick back, high gloss, excellent ink absorption, fast drying after printing, fine printing precision, bright colors, true restoration.

Coater coating production. Applicable to all types of coater coating production.

Drying method: drying with hot air at 100 ° C.

Coating Quantity: 35g/m2(regular dry base coating quantity, special circumstances can be adjusted according to product quality requirements and production cost control) .

Note:

1. The ink-jet material produced by this product requires the use of weak solvent ink printing output, non-weak solvent material production please use the company's other models of products

2, this product is a surface coating, under normal circumstances need to make a primer with;

3, if the product needs to add pearlescent powder to use, before use to make sure that the PH value does not exceed 6.5(PH meter accurate measurement) .

4. The finished product reaches the best performance about 7 days after the production line of coating.

[ packaging ] the standard packaging is 125kg impact-resistant plastic barrel (lined with plastic inner bag) . The non-standard packaging provides the scheme according to the specific situation.

Store in 5-45 ° C indoor storage (to prevent direct sunlight and open-air freezing) .

Shifang Xiangtai Chemical Co. , Ltd. ,

technical contact: Li Gong 15928701931

Weak solvent TPV-3612  Instruction Download