G101

appearance: colorless transparent viscous liquid

solid content: 12 ± 1%

PH: 5-7.5

viscosity: 3500 > viscosity ≥400 mpa. S (25 ° C)

[ suitable material ] this product is mainly used for various types of PT film, Crystal Silver Film and other membrane materials. This product is mainly used for various types of PT film, Crystal Silver film and other membrane materials substrate. Customer according to the actual situation to adjust the product suitable on the machine viscosity, adjust the viscosity with pure water to adjust to the appropriate viscosity.

[use method]Apply to all types of coater coating production.

1, direct use or take material 100kg diluted into pure water to the appropriate machine viscosity.

2. After dispersing evenly, the rotating speed of the disperser is reduced, and the foam is defoamed by low-speed agitation.

3, on the machine coating.

4, coating amount reference value: dry base 20-25g/m2, according to customer demand print effect self-adjustment coating amount.

Drying method: drying with hot air around 110 ° C. Due to the different length of coater oven, wind speed and vehicle speed, the coating effect is based on the experimental sample sheet, and the coating process parameters are adjusted. It is suggested that the wind temperature of coater should not be lower than 110 °C.

Note:

1, this product is ready-to-use products, no need to add any additives. 2. If not used in time, it can be stirred before use and then used.

3. Be sure to test the finished product before mass production to ensure that it meets the requirements before use.

4. The viscosity of the product becomes larger and the fluidity becomes worse at low temperature, which is a normal phenomenon. It should be slightly heated (17-25 ° C) before use, and the viscosity will decrease.

[ packing ] packing is 1000kg impact-resistant ton barrel; non-standard packing according to the specific circumstances to provide solutions.

Store in 5-45 ° C indoor storage (to prevent direct sunlight and open-air freezing) .

Shifang Xiangtai Chemical Co. , Ltd. ,

technical contact: Li Gong 15928701931

G101  instruction manual DOWNLOAD