G60-P29

Appearance: Milky white water-based size

solid content: 27 ± 0.5%

PH: 3.5-3.8

viscosity: < 5000mpa. S (25 ° C)

[ applicable materials ] this product is mainly used for various types of PT film, art paper, Kraft paper and coated paper, as well as all kinds of paper and cloth. This product is mainly used in all kinds of PT film, art paper, Kraft paper and coated paper, as well as all kinds of paper and cloth.

Customers according to the actual situation to adjust the product suitable on the machine viscosity, adjust the viscosity with pure water to adjust to the appropriate viscosity. Apply to all types of coater coating production.

[Use method]

1, take material 100kg add pure water diluted to the appropriate machine viscosity.

2. After dispersing evenly, the rotating speed of the disperser is reduced, and the foam is defoamed by low-speed agitation. 3, on the machine coating.

3. Coating quantity reference value: dry base 35-37g/m2, according to customer demand print effect self-adjustment coating quantity.

Drying method: drying with hot air around 110 ° C. Due to the different length of coater oven, wind speed and vehicle speed, the coating effect is based on the experimental sample sheet, and the coating process parameters are adjusted. It is suggested that the wind temperature of coater should not be lower than 110 °C.

Note:

1, this product is ready-to-use products, no need to add any additives.

2. If not used in time, it can be stirred before use and then used.

3.Before mass production, be sure to test the finished product to make sure it meets the requirements before using it.        4. The viscosity of this product becomes larger and the fluidity becomes worse at low temperature, which is a normal phenomenon. It should be slightly heated (17-25 ° C) before using, the viscosity will drop, and the paint will be used again after the fluidity is restored.

[ packaging ] the standard packaging is 125kg impact-resistant plastic barrel (lined with plastic inner bags) ; the non-standard packaging provides the scheme according to the specific situation.

Store in 5-45 ° C indoor storage (to prevent direct sunlight and open-air freezing) .

Shifang Xiangtai Chemical Co. , Ltd. , technical contact: Li Gong 15928701931

G60-P29 Instruction Download